|
Preventative Maintenance
Remember to frequently check your generator for leaks, corrosion and salt-build up.
For new owners, ensure that you have a qualified technician check your generator after 35 hours. See your manual for details. |
Check List Every 100 Hours
- Change motor oil
- Change oil filter (where available)
- Check fine particle fuel filter
- Empty water separator from pre-fuel filter
- Readjust valve clearance every 200 hours
- Replace the valve cover gasket every 200 hours
- Check all sensors & switches
- Check all generator & engine screws for tightness
- Check electrical cables
- Check starter battery
- Check fuel system including electrical fuel pump
- Check and clean air intake manifold suction system
- Check coolant and water hoses/change coolant once per year
- Check raw water pump, impeller, water flow rate (gallons/minute)
- Idle run voltage Volt:
- Voltage under full Load Volt:
- Current under full load Ampere:
- Engine speed (RPM) no load Hz:
|
Here are some key things
to be done before storage
- Flush cooling systems with fresh water using a hose placed in the strainer allow running time
of 5-10 minutes.
- Place hose coming to strainer in a bucket containing biodegradable antifreeze, restart Generator run till mixture coming out exhaust.
- Close thru hull fitting.
- Open capsule leave upper latch between both halves to allow for air circulation.
- Turn battery switch off
|
Upon re commissioning do the following
- Replace raw water impeller
- Check all hose & clamps
- Open thru hull, turn battery
switch on
- Change oil
- Replace fuel filters prime system fuel system, turn on panel unplug wire at oil pressure switch 3-5 minutes until fully bleed
- Reconnect wire at oil pressure switch, start generator run without load 5-10 minutes, apply load & verify no leaks
|
|
AC Generators Maintenance and
Troubleshooting Downloads |
DC Generators Maintenance and
Troubleshooting Downloads |
PMS 4200 FCB
Maintenance Schedule
Troubleshooting
Request Information |
PMS 6500
Maintenance Schedule
Troubleshooting
Request Information |

PMS 8 Mini
Maintenance Schedule
Troubleshooting
Request Information
|

AGTPM 4
Maintenance Schedule
Troubleshooting
Request Information
|
PMS 12 Mini
Maintenance Schedule
Troubleshooting
Request Information |
PMS 16
Maintenance Schedule
Troubleshooting
Request Information |
PMS 22
Maintenance Schedule
Troubleshooting
Request Information |

AGTPM 6
Maintenance Schedule
Troubleshooting
Request Information
|
|
|
|
|
|
Download Manuals in the following languages:
German: PMS 12 | PMS 4000 | PMS 4500 | PMS 6500 | PMS 8000
French: PMS 12 | PMS 4200 | PMS 6500 | PMS 8000
Italian: PMS 4500 | PMS 8000